400ml fast varnish spray

It is a quick-drying gloss varnish for base varnish with excellent fluidity. Very resistant to all types of bad weather, as well as chemical and mechanical loads.
High UV protection, non-yellowing, lightfast. Excellent scratch resistance. Excellent fluidity and surface finish.
Safe and clean transfer of hardener. Fuel resistant.

Support:
2-layer base layers. Old supports must be clean, free of grease and well dried.
Pre-treatment / Cleaning: Pre-clean with 4CR silicone remover.
Application conditions from +10°C and up to 80% relative air humidity.

Drying time :
Dust drying: after approx. 10 -15 min.
To the touch: after approximately 4 hours.
Total hardness: after 24 hours.

Before application, all surfaces must be clean, dry and degreased. Before spraying, remove the red button from the
the red button on the cap and attach it to the pin at the bottom of the aerosol can. Press the red button with the palm of your hand until it stops.
until it stops. Shake the aerosol vigorously for 2 minutes. Spray to test. The spray distance is approximately 25cm. Apply
2 to 3 coats of 2K-Topcoat with a flash-off time of approximately 3 to 5 minutes.